• Coating


TITAN is our revolutionary hybrid coating containing unmatched levels of pure ingredients sourced from across the globe.

Titan contains our High Performance HyperQuartz Carbon technology which creates a flexible yet hard protective layer on the applied surface creating hypergloss with incredible depth and enhanced clarity.

TITAN was engineered for paint protection, it increases surface hardness, presents you with reoccurring Hypergloss and keeps water spots at bay rather than simply being built for hydrophobicity and beading.

It was also engineered to perform like an Elastomer on a micro-scale with a superior flexibility to hardness ratio.

TITAN has a polymer reformation function activated by heat that helps keep paintwork free from swirls.

Click below for further information

Single layer application
Zero Resins
Zero endocrine altering chemicals
Zero hazardous chemicals
Enhanced Chemical resistance
Non-Solvent based
Polymer reformation properties can be activated with heat
Durability: Up to 60 months (50K Miles) with a single application*
Thickness layer: 1-2 microns
Water contact angle: 115 degrees
PH tolerance: 1-13
Hardness: 8H-10H Dependent on Substrate
Initial curing/stacking time: 2 Hours
Stack-able up to 5 layers
Stacking provides enhanced self levelling properties compared to a single layer
IR Curable
Full curing time: 7 days
Titan is suitable for all types of paint systems including gloss/matte/sateen, ppf (gloss/matte/sateen), all types of wraps, plastics, carbon fibre, wheels, exhaust, calipers and front/rear lights.

1. Apply 10-15 Drops of Titan to applicator

2. Apply in crosshatch pattern slowly to create an even layer

3. Curing is dependent on ambient temperature & humidity

4. Allow to cure before wiping off the residue lightly in a single direction. Use a 2nd Microfibre to lightly buff the coated area.

5. Please allow 2 hours before layering and stacking, if stacking VulcanTX155 on top please allow 12 hours.

6. IR Curing- Set lamps to 60°C and bake for 15 minutes per panel During hot/humid weather we recommend a simple wipe on-wipe off method

Matte paint, PPF (gloss&matte) and wraps- apply as normal and remove within 1 minute.

Decontaminate vehicle with ph. controlled iron fall out remover every 3 months and apply Ultra every 3 months.Do not use spray and rinse sealants as any remaining residue may affect the finish of your vehicles paintwork.